The NXR Parameter TC8 Sports Helmet features a new ventilation system, clear vision and optimum aeordynamics to make the helmet as light as possible on your head.
In addition to safety, aerodynamics, clear vision, a ventilation system which truly performs as well as compact and light motion performance are required. The NXR from SHOEI is the new pure sports full-face helmet for the modern rider who demands a world-class sports performance.
The NXR boasts a newly designed shell - smaller in size, this new slim and light shape is realised through the use of a redesigned shell baseline on both sides.
Effective ventilation Performance
Three straight hole intakes in forehead - 4 outlets located inside parts realize air exhaustion that is improved upon from the XR-1100.
The reduction of wind noise has been improved by restraining the cause of noise. This has been achieved by the improvement of wind beading and utilising larger cheek and ear pads.
The NXR utilises a completely new visor and base plate system. While Shoei's world-renowned design for hassle free fitting and removing of the visor is maintained, the base plate can be adjusted front and rear by rotating a dial.
7 Sizes from XXS to XXL
Moisture Absorption Quick Dry Interior Fabric
Advanced fabric with high moisture absorption and quick drying properties is used throughout all interiors.
Pinlock Fog-free Lens
The NXR comes supplied with Pinlock Fog-Free lens.
In the event of an accident, in can be difficult as well as dangerous for a third party to try and removethe helmet from a rider. The NXR features Shoei's exclusive 'Emergency Quick Release System'. By pulling this EQRS ring tab, a third party can remove the helmet's cheek pads and remove the helmet safely lowering the risk of further injury.
The NXR impact absorption liner consists of 2 liners in different hardness. In the event of impact the liner works in conjunction with the shell to absorb the energy of the imapct whilst protecting the rider.
Visor System :-
All new for the Shoei NXR
Visor system is newly developed for NXR with favored injection molded visor made of polycarbonate. Curvature and thickness of newly developed CWR-1 visor are varied part by part to improve optical performance and realize natural and clear vision with minimum distortion. Ribs on top and bottom improve rigidity of a visor itself and eliminate bending of a visor by wind pressure or during opening or closing.
'Down & Press Double Action', shown in drawing below, for visor opening and closing in variable axis realizes close contact with window beading by power of spring which is stronger than that of former model. While fully closed, a visor contacts with window beading closely and tilting of a visor by wind pressure is blocked, and so, high air tightness is realized.
Not only the visor but also the visor base is newly developed for NXR. Maintaining easy and firm fixing and removing of a visor, it allows fine tuning of visor setting easily by rotating a dial of a visor base. PINLOCK fog-free sheet in CWR-1 is standardized.
Keep Cool with the NXR
Air intakes are placed in the centre of the forehead and both sides of the helmet for stable absorption of riding wind, this is esecially effective in a sports riding position.
Wind absorbed from the 3 intake holes goes directly to the inside liner giving real ventilation performance to the rider. Air outlets to improve performance are utilised to through 4 outlet holes inside to exhaust hot air effectively.
An enhanced balance of air absorption and exhaustion achieves a high quality ventilation system, which cools all parts of the head evenly.
High Speed Riding splitting air with a rider and a motorcycle - the helmet attacks a wall of air.
What is important an aero shape restraining resistance extremely. SHOEI advanced aero shape to a firm shape by repeating tests in large wind tunnel facility. Aerodynamics of a helmet affects directly a load on neck of a rider especially in high speed riding. SHOEI is realizing a practical aero-shape restraining lift and shake in high speed riding through repeated wind tunnel experiments.
A comfortable and lightweight fit is essential to modern sports riding. The NXR achieves this goal through a completely new interior.
The new cheek pad construction features a more aggressive lower line along the base of the shell. This improves fit and provides a 'softer' feel when wearing or removing the helmet. This reduces neck strain for the rider when looking behind. The base line of the cheek pad improves comfort and reduces external noise.
3D Full Support Inner Tyep4 is applied to a center pad. While a soft textured raised fabric is applied to an area which touches skin during wearing and removing, an advanced material is applied to an area which needs to absorb sweat effectively. Soft fit and firm hold are realized by this combination of 2 different materials. With red colored mesh material is used partially as an accent, sporty appearance is emphasized.
Wind noise can be a major distraction to the rider over a long period of time - causing exhasution and loss of concentration.
The Shoei NXR features a new aerodynamic shape, increased cheek pads and an air tight visor system to reduce the occurrence of wind noise. Furthermore, removable ear pads applied inside the ear space contribute to restraining wind noise. These features can help reduce rider fatigue over a longer riding period.
Sheffield Motorcycle Centre Ltd is an Appointed Representative of Automotive Compliance Ltd, who is authorised and regulated by the Financial Conduct Authority (FCA No 497010). Automotive Compliance Ltd’s permissions as a Principal Firm allows Sheffield Motorcycle Centre Ltd to act as a credit broker, not as a lender, for the introduction to a limited number of lenders and to act as an agent on behalf of the insurer for insurance distribution activities only.
We can introduce you to a selected panel of lenders, which includes manufacturer lenders linked directly to the franchises that we represent. An introduction to a lender does not amount to independent financial advice and we act as their agent for this introduction. Our approach is to introduce you first to the manufacturer lender linked directly to the particular franchise you are purchasing your vehicle from, who are usually able to offer the best available package for you, taking into account both interest rates and other contributions. If they are unable to make you an offer of finance, we then seek to introduce you to whichever of the other lenders on our panel is able to make the next best offer of finance for you. Our aim is to secure the best deal you are eligible for from our panel of lenders. Lenders may pay a fixed commission to us for introducing you to them, calculated by reference to the vehicle model or amount you borrow. Different lenders may pay different commissions for such introductions, and manufacturer lenders linked directly to the franchises that we represent may also provide preferential rates to us for the funding of our vehicle stock and also provide financial support for our training and marketing. But any such amounts they and other lenders pay us will not affect the amounts you pay under your finance agreement, all of which are set by the lender concerned. If you ask us what the amount of commission is, we will tell you in good time before the Finance agreement is executed. All finance applications are subject to status, terms and conditions apply, UK residents only, 18’s or over. Guarantees may be required.